Views: 0 Author: Site Editor Publish Time: 2025-12-08 Origin: Site
Perhaps you will inevitably encounter the problem of workpiece sawing when using a band sawing machine. If the workpiece is sawing diagonally, it will affect the next step of processing. Therefore, we need to avoid the occurrence of sawing skewness during use. Below, Wonsten Group will take you to understand the precautions when using it.
（1） If everything was normal during the early stages of sawing and there were no issues with the saw blade, but the saw blade was replaced and caused the saw to tilt, then it may be due to the quality of the saw blade, which is generally the main factor.
（2） If the factor of saw blade is excluded, then other factors need to be considered, such as metal band saw machine. If there were no issues with the previous saw blade, such as the tooth profile, then this time it is important to focus on checking the relationship between the metal band saw and the saw blade. After all, the saw blade needs to be replaced every time, so factors related to the saw blade, such as insufficient tension and high feed rate, need to be taken into account.
（3） If all the above problems are ruled out, then it is necessary to consider whether the sawing machine has reached the maintenance period. After all, metal band sawing machine accessories also have a lifespan, and no one knows when it will have problems.
（4） Regarding the factors that cause the metal band sawing machine to be misaligned, we only need to check the spacing between the guide blocks, the gap between the guide arms, and whether the saw frame is vertically perpendicular at a 90 degree angle.
The above are the processing methods provided by the metal band sawing machine from Wonsten Group. Familiarity with these methods can solve the problem of skewness when sawing materials. For more information about metal band saw, please visit the official website of Wonsten Group for consultation.
